No Money Down Real Estate Investing Course
Learn How To Buy Income Properties Without Risk, Good
Credit, Money Or Tenants!

Click here for more information
Welcome, Unregistered.
User Name
Forum Links
Site Navigation
Real Estate Resources
Go Back   Real Estate Investing > Real Estate General > Yahoo Investing Group
Thread Tools Search this Thread Display Modes
Old 12-09-2013, 03:14 AM
qnxcbemc qnxcbemc is offline
Senior Member
Join Date: Nov 2013
Posts: 138
Default expensive sdt -38

Sounds like one turn per inch of motion. Rotate the leadscrew one revolution and measure how far Ralph Lauren Polo Shirts Uk Ebay it moves. If so, IMO, that is too coarse for trace milling PCB's. Even with microstepping, your small machine will be really fast, but have poor resolution. Lots of big machines use screws like this to go faster, but they are not very well suited for smaller machines. The pitch looks nearly the same as an eight start screw. A photograph of the Belstaff Sale Jackets cut end from the screw would be good.
Which means you could go through the trouble to make use of all of the parts you have only to have it Ugg Boots Online Shop Canada not do what you need, which would be a bummer. Before my build, I assumed the biggest hurdle was price of materials, but really it is time and labor.
Yeah I'm dealing with the point where 'the more you know' makes it 'the harder it seems'. I used to take a look at complicated designs and think 'sure, I can find those parts and do this!', but as time has worn on here, now I take a look at very simple machines and think "how on the planet am I going to get that to be square within this apartment?" I took a picture of the lead screw for the viewing pleasure it appears to be 5 start now that the thing is dismantled. I also found out the hardened rods are different sizes, so its either make use of the whole assembly for something, or allow it to be I think.
I'm starting to lean back more perfectly into a simple machine and new screws Cheap Insanity Workout Set Uk that provide more precision. I like the idea of fast, but with a fixed gantry along Belstaff Mens Leather Jacket with a 16 inch screw, I imagine I'd be getting something like 8 inches of cutting area all said and done. That is one reason I like the (expensive) concept of a bolt together 8020 machine, it appears as though it'd be easy to keep things at 90 degrees, and reduce drilling and tapping.
Yes, five start it's. Perfect for larger machines, or you don't demand a lot of resolution in a small machine. I've got 1/2" five start screws on my small 24X48 Solsylva, but I don't plan on attempting to do anything that requires a lot of resolution. I do mostly wood and a bit of aluminum.
8020 machines make for a simpler build and there are plenty of kits to select from. Probably a good direction to visit if you are building in an apartment. Your build goes faster too. If you scratch build it could drag on for years and you might lose interest halfway through. Ask me how I know.
When you analyze the way the machine is built you will see that the gantry is offset towards the rear of the frame's center line by the offset of the cutter towards the centerline of the Manteau Canada Goose gantry to maximise the front to rear movement and also have the cutter able cut nearly the entire area Ralph Lauren Mens Polo Shirts of the table. At least it will be centered on the table for the full xy travels. Sometimes the table is greater than the travels to allow for clamping the materials.
This is a characteristic of all fixed gantry style CNC machines. The moving table size is commonly smaller for the same size framework like a moving gantry style table area. Especially so in the front to back dimension. The advantage over a moving gantry style is that a fixed gantry can be made considerably stiffer. microcarve's designs are plenty stiff for a relatively low cost MDF Mont Blanc Australia Online machine for carving wood (as well as for aluminum if it isn't pushed too fast or too deep). He has lots of satisfied users all over the world.
I have all the parts to build one of the BBX machines including certainly one of John's 4.5" Z axis assemblies, G540, and motors. I am using epoxy laminated red oak 1x12 lumber rather than MDF. It's all still waiting for me to get back to it though. Too many other things in the way of completing it. At one point I almost started building a standalone rotary axis for the G540, but that has been sidelined until later also.


he said.

" tweeted church member Margie Phelps. vvr -43

this post


If you are not able to get to your mail box half a year ago 7r2 -KK

File sharing

removed the dust naj -31

right 2k7

said gzw

7036848500 x1854 Fax 2e4 -TP

|and moreover|and as well hsk -33
Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

All times are GMT -8. The time now is 12:18 PM.

Powered by: vBulletin Version 3.0.8
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 2.4.0
Copyright 2001 - 2006, Buy Income Properties, Inc. All Rights Reserved. Privacy Policy in Observance.